Leading axle spring shackle bolt - filling supply reservoir

Type ap · topic 32.00 · version 0103 · 2005-06-08

Applies to: MODELS 934.233 ## up to 893558, 944.233 ## up to 909057, 954.233 with FRONT AXLE 739.580

Where it sits

Function group 2 Chassis › 32 Suspension › 32.00 General — Series 934 (models 233) · Series 944 (models 233) · Series 954 (models 233)

EinPAS 20 Chassis › 20.16 Suspension › 20.16.31 Pressure generation/container/control block — Series 934 (models 233) · Series 944 (models 233) · Series 954 (models 233)

Also applies to engines/gearboxes: 739 580

AP32.00-W-3221A

Leading axle spring shackle bolt - filling supply reservoir

6.6.01

MODELS 934.233 ## up to 893558,
944.233 ## up to 909057,
954.233
with FRONT AXLE 739.580

N32.00-2011-11

1	Clean lubricating nipple and supply reservoir of spring shackle bolt using a cleaning cloth.
2	Remove cap from lubricating nipple.
3	Fill left and right supply reservoirs up to red mark (arrow) on sightglass	 Do not use a high-pressure grease gun to fill the supply reservoirs otherwise the spring shackle bolt may be irreparably damaged.
		 Remove grease which has escaped at the lubrication points.
	Wheel bearing grease (NLGI grade 2)	Sheet 267.1	BB00.40-P-0267-01A
4	Fit cap on lubricating nipple.