ap2000b2080evi

Replace coolant

Tip ap · temă 20.00 · versiune 0100 · 2018-05-22

Valabil pentru: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 20 Răcire motor › 20.00 Generalităţi — Seria 382 (modele 155, 189) · Seria 936 (modele 9**)

EinPAS 15 Motor › 15.25 Sistem răcire motor › 15.25.5 Circuit de lichid de răcire complet — Seria 382 (modele 155, 189) · Seria 936 (modele 9**)

AP20.00-B-2080EVI

Replace coolant

16.05.2018

Engine	936.9 in model 382.155/189
	with code MS6 (Euro VI)

Replace coolant

1	Reservoir cap
2	Filling indicator
3	Equalizing tank
4	Reservoir drain plug

B20.00-0074-01

Replace coolant

5	Water radiator
6	Water radiator drain plug

B20.00-0081-11

 Warning	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
 Warning	Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.	Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses.	AS20.00-Z-0001-01A
Topical note	Notes on coolant		AH20.00-N-2080-01A
1	Open the engine compartment	 The access to perform maintenance and repair works varies according to the type / body manufacturer.
2	Check leak-tightness and state of the cooling system and heating		AP20.00-B-2050EVI
3	Remove the reservoir cap (1)	 Adjust the temperature regulator in the heating operation unit to the maximum heating power, the air-conditioning or automatic acclimatization.
4	Loosen the reservoir drain plug (4) and the water radiator drain plug (6)
5	Drain the coolant	 The coolant and the corrosion residues should be totally drained and discarded in an ecological way.
		 If the cooling system has strong buildup or excess fat, submit it to a process of degreasing / descaling.
6	Install the reservoir drain plug (4) and the water radiator drain plug (6)	 Draining screw on engine radiator	*BA20.20-B-1001-02EVI
7	Fill up the system with coolant	 Fill up the system with coolant through the expansion reservoir (3) up to overflow.
		 Cooling system	*BF20.00-B-1001-01EVI
8	Starting the engine	 The engine should work for approximate 5 minutes at alternate speed.
		If coolant is not at maximum level of the filling indicator (2):
		
		Add coolant until reaching the maximum level of the filling indicator (2).
9	Install the reservoir cap (1) in the expansion reservoir filler neck (3), fitting it completely
10	Close the engine compartment

 Engine radiator, coolant hoses/lines

Number	Designation		ENGINE 936.9
BA20.20-B-1001-02EVI	Draining screw on engine radiator	Nm	5

 Coolant

Number	Designation			Engine 936.9 in Type 382.155/189
BF20.00-B-1001-01EVI	Cooling system	Refueling volume	Litros	40
		Anticorrosion/antifreeze	CLASSES MB	325.5, MB 326.5

Documente menționate

ah2000n208001a Indicaţii pentru lichid de răcire
ap2000b2050evi
as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
as2000z000101a Pericol de rănire la piele şi ochi prin opărire cu lichid de răcire fierbinte pulverizat afară. Pericol de otrăvire datorită înghiţirii lichid de răcire.