ap1322t1351a

Inspect poly V-belt for wear and damage

Tip ap · temă 13.22 · versiune 0106 · 2005-07-12

Valabil pentru: ENGINE 402, 441, 446 in MODEL NMB613 ENGINE 447, 489 in MODEL NMB671 ENGINE 457.944 in MODEL NMB613.358 /388 /367 ENGINE 457.942 in MODEL NMB671.015 /020 /021 /030 /042 /332 /333

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 13 Compresor aer, transmisie prin curea › 13.22 Acţionare cu o curea — Seria 441 · Seria 447 · Seria 613 · Seria 671

EinPAS 15 Motor › 15.18 Antrenare curea › 15.18.30 Curea/Fulie de curea/Dispozitiv de întindere/Rolă de ghidare — Seria 441 · Seria 447 · Seria 613 · Seria 671

Valabil și pentru motoare/cutii de viteze: 402 ***, 446 ***, 457 942, 457 944, 489 ***

AP13.22-T-1351A

Inspect poly V-belt for wear and damage

3.5.00

ENGINE 402, 441, 446 in MODEL NMB613

ENGINE 447, 489 in MODEL NMB671

ENGINE 457.944 in MODEL NMB613.358 /388 /367

ENGINE 457.942 in MODEL NMB671.015 /020 /021 /030 /042 /332 /333

Inspect poly V-belt for wear and damage

T13.22-0006-01

Shown on model 613.358 with rear axle 745.997, tensioning device for refrigerant compressor poly-V-belt

4 Wear indicator

Inspect poly V-belt for wear and damage

T13.25-0025-02

Shown on model 613.358 with rear axle 746.217, tensioning device for refrigerant compressor poly-V-belt

4 Wear indicator

Check

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

1

Check position of wear indicator (4)

If there is less than 5 mm play on the wear indicator (4) up to the respective stop (arrows), the poly-V-belt is considered worn out.

2

Check condition of poly-V-belt

To do this, crank the engine in stages using a cranking device and check the entire circumference of the poly-V-belt for wear and damage.

Damage patterns for poly V-belt

AP13.22-T-1351-01A

*407589006300

3

Check condition of the V-belt

To do this, crank the engine in stages using a cranking device and check the entire circumference of the V-belt for wear and damage.

*407589006300

Inspect poly V-belt for wear and damage

Cranking device

407 589 00 63 00

Documente menționate