ap0020t0051ca

All lines and hoses, sensor cables - checking tightness and condition

Tip ap · temă 00.20 · versiune 0101 · 2005-07-12

Valabil pentru: MODEL NMB613.367 /368

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 0 Total › 00 Autovehicul în ansamblu › 00.20 Revizie, sisteme de revizie (FSS, ASSYST) — Seria 613 (modele 367, 368)

EinPAS 45 Date/Informaţie › 45.10 Întregul autovehicul › 45.10.20 Întregul autovehicul — Seria 613 (modele 367, 368)

AP00.20-T-0051CA

All lines and hoses, sensor cables - checking tightness and condition

8.5.02

MODEL NMB613.367 /368

Testing

1

Switch off running engine if applicable

2

Carry out visual inspection of all oil/fuel/coolant/compressed air and refrigerant lines in the engine compartment

Check for leaktightness, chafe-free routing and proper fixing.

3

Lift vehicle at the front axle

See operator's manual.

Danger!

Risk of accident from independent movement when working on jacked-up vehicle. Risk of injury from rotating parts when working on running engine or drive train.

Ensure that supports are in a safe condition.
An authorized person must occupy the driver's seat.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0008-01A

4

Start the engine and turn steering counterclockwise to the full extent then clockwise to the full extent

During the complete process, brake hoses and brake lines must not come into contact with other components due to the danger of chafing.

5

Lower the vehicle and turn steering counterclockwise to the full extent then clockwise to the full extent

During the complete process, brake hoses and brake lines must not come into contact with other components due to the danger of chafing.

6

Switch off engine

7

Rectify any leaks or damage immediately

Brakes lines which are chafed or damaged must be replaced due to the risk of accident and must be routed free from chafing
(against a separate order).

Documente menționate