os3232p060501a

Disposing of shock absorber/ADS

Tipo os · tema 32.32 · versão 0104 · 1999-01-28

Válido para: MODEL 140, 210 with CODE (217a) Adaptive damping system (ADS) with level control on rear axle

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 2 Chassí › 32 Suspensão › 32.32 Regulagem de nível com sistema adaptivo de amortecimento (ADS) — Série 140 · Série 210

OS32.32-P-0605-01A

Disposing of shock absorber/ADS

Wear safety glasses

Danger!

Risk of injury when drilling assemblies or components containing gas (gas fill is not ignitable)

Wear safety goggles and a face protection.

AS00.00-Z-0006-01A

Disposing of shock absorber/ADS

P32.32-0214-01

1 Remove boot (arrow - illustration shows the shock absorber/ADS on model 140).

2 Drill shock absorber tube approx. 30 mm (dimension A) from the shock absorber base with a 5 mm drill (gas escapes).

3 Drill shock absorber tube approx. 40 mm (dimension B) from the compression pot with a 5 mm drill (oil escapes).

4 Drill shock absorber tube in the center, opposite the damper valve (dimension C) with a 5 mm drill (vent hole for oil).

5 Press the piston rod in several times, thus pumping the shock absorber empty.
Position the shock absorber upright and empty. The quantity of oil is 300–400 cm3 depending on the version.

Comply with regulations governing disposal of hydraulic oil

6 Dispose of shock absorber (old part).

Documentos referenciados