ar9129p1421g
Removing and installing seat height adjustment drive
Tipo ar · tema 91.29 · versão 0103 · 2003-04-28
Válido para: MODELS 463.200 /204 /206 /207 /208 /209 /220 /221 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /300 /304 /307 /308 /320 /321 /324 /325 /327 /328 /330 /331 with CODE (SB5) Electrically adjustable left front seat with CODE (SB6) Electrically adjustable right front seat
Não disponível em “pt”; apresentado em Inglês.
Onde se situa
Grupo funcional 3 Carroçaria › 91 Assentos, leitos, sistemas de retenção › 91.29 Elétrica do assento — Série 463 (modelos 200, 204, 206, 207, 208, 209, 220, 221, 224, 225, 227, 228, 230, 231, 232, 233, 240, 241, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331)
EinPAS 37 Acabamento interno › 37.26 Banco dianteiro › 37.26.47 Regulagem do banco — Série 463 (modelos 200, 204, 206, 207, 208, 209, 220, 221, 224, 225, 227, 228, 230, 231, 232, 233, 240, 241, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331)
EinPAS 37 Acabamento interno › 37.27 Banco traseiro › 37.27.47 Regulagem do banco — Série 463 (modelos 200, 204, 206, 207, 208, 209, 220, 221, 224, 225, 227, 228, 230, 231, 232, 233, 240, 241, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331)
EinPAS 37 Acabamento interno › 37.28 Banco do passageiro › 37.28.46 Regulagem do banco — Série 463 (modelos 200, 204, 206, 207, 208, 209, 220, 221, 224, 225, 227, 228, 230, 231, 232, 233, 240, 241, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331)
AR91.29-P-1421G
| Removing and installing seat height adjustment drive
| 19.7.99
|
MODELS 463.200 /204 /206 /207 /208 /209 /220 /221 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /300 /304 /307 /308 /320 /321 /324 /325 /327 /328 /330 /331
with CODE (SB5) Electrically adjustable left front seat
with CODE (SB6) Electrically adjustable right front seat
1 Screw for seat height adjustment motor
2 Bracket screws
3 Bracket
4 Plastic clip
5 Plug-in wiring plug connection
6 Plug-in wiring plug connection
7 Tie strap
M18m1 Seat height motor
M19m1 Seat height motor
| Remove/Install
|
|
|
1
| Move front seat all the way forward
|
|
|
2
| Remove the screws securing the seat height adjustment motor (1).
| Pull up the seat until access to the screws (2) and the plug-in wiring connection (5, 6) is available.
|
|
3
| Cut off the wire ties (7).
|
|
|
4
| Disconnect electrical connector (5, 6) from seat height motor (M18m1, M19m1)
| Mark terminals to prevent any risk of incorrect connections.
|
|
5
| Remove screws at bracket (2)
|
|
|
6
| Remove bracket (3) from seat frame.
| Installation: lightly grease plastic clip (4) before installation.
|
|
7
| Remove seat height motor (M18m1, M19m1)
|
|
|
8
| Install in the reverse order
|
|
|
9
| Run an operational check on front seat
| See Operating Instructions
|
|
