L82.20-0005-09
1 Screws
2 Screw
3 Screw
6 Front bumper
7 Inner fender
4 Clips
5 Side guide
| Removing, installing | ||
1 | Open engine hood | ||
2 | Remove front grille | ||
3 | Unscrew screws (1, 2, 3) | To unscrew screw (2) press inner fender (7) to side (arrow) | |
4 | Unclip clips (4) | Installation:Check clips, replace if necessary. | |
5 | Unclip bumper (6) from side guides (5) and remove with 2nd person | Avoid damaging paint. Pull bumper (arrows) toward front when removing Installation: When installing position bumper (arrows) at both sides of side guides (5) and slide back If bumper is replaced | |
Transfer grille, cover and if necessary Parktronic sensors. | |||
6 | Install in reverse order |