ar8820l2000va

Removing and installing front bumper

Type ar · topic 88.20 · version 0100 · 2003-03-12

Applies to: MODEL 414.700

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.20 Bumpers — Series 414 (models 700)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.30 Front bumper — Series 414 (models 700)

AR88.20-L-2000VA

Removing and installing front bumper

16.2.01

MODEL 414.700

Removing and installing front bumper

L82.20-0005-09

1 Screws

2 Screw

3 Screw

6 Front bumper

7 Inner fender

4 Clips

5 Side guide

Removing, installing

1

Open engine hood

2

Remove front grille

AR88.00-L-2115VA

3

Unscrew screws (1, 2, 3)

To unscrew screw (2) press inner fender (7) to side (arrow)

4

Unclip clips (4)

Installation:Check clips, replace if necessary.

5

Unclip bumper (6) from side guides (5) and remove with 2nd person

Avoid damaging paint.

Pull bumper (arrows) toward front when removing

Installation: When installing position bumper (arrows) at both sides of side guides (5) and slide back

If bumper is replaced

Transfer grille, cover and if necessary Parktronic sensors.

6

Install in reverse order

Referenced documents