ar8264p7508ff

Removing and installing CD changer

Tipo ar · tema 82.64 · versão 0101 · 2005-11-04

Válido para: MODEL 454.0 with CODE (C20) smart CD changer

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 82 Instalação elétrica, carroçaria › 82.64 Disqueteira de CD — Série 454 (modelos 0**)

EinPAS 31 Comunicação/informação/Entertainment › 31.67 Reprodução de mídia/mídia › 31.67.11 Módulo de comando/relé — Série 454 (modelos 0**)

AR82.64-P-7508FF

Removing and installing CD changer

14.8.03

MODEL 454.0 with CODE (C20) smart CD changer

Removing and installing CD changer

P82.64-2709-08

1 Right front seat

2 Floor mat

5 Bracket

A2/6 CD changer

3 Electrical connector

4 Fiber-optic cable connection

Removing and installing CD changer

P82.64-2710-05

5 Bracket

6 Bolts

A2/6 CD changer

Removing and installing CD changer

P82.64-2708-04

7 Cap

8 Adjustment bolt

A2/6 CD changer

Removing and installing CD changer

P82.64-2905-01

5 Bracket

9 Stop

Remove

1

Remove right front sear (1)

AR91.10-P-1000FF

2

Separate electrical plug connection (3)

3

Disconnect and cover fiber optic cable coupling and fiber optic cable (4)

Fiber optical cables must not be kinked, routed over sharp edges or bent in radii of less than 25 mm, otherwise the fiber optic cable core will be yellowed and broken. Yellowed or broken fiber optical cables weaken the light.

AR82.95-P-0005-01A

4

Fold corners (arrows) of floor lining (2) forward

5

Remove CD changer (A2/6) with bracket (5) upwards

6.1

Remove screws (6) and remove CD changer (A2/6) from bracket (5).

When replacing the CD changer (A2/6).

Install

7.1

Remove transport protections for CD changer (A2/6) as shown in attached instructions

When replacing the CD changer (A2/6).

8.1

Remove the left and right covering cap (7) and behind them, set the adjusting bolt (8) for the horizontal installation position of the CD changer (A2/6)

When replacing the CD changer (A2/6).

H = Horizontal installation position

9.1

Use suitable screwdriver to bend stop (9) of bracket (5) to the rear

When converting the CD changer (A2/6) to a CD changer (A2/6) with integrated MP3 player.

10.1

Mount CD changer (A2/6) onto bracket (5) and tighten with screws (6)

When replacing the CD changer (A2/6).

11

Fold corners (arrows) of floor covering (2) backward

12

Insert bracket (5) with CD changer (A2/6) from above

13

Remove covers of fiber optic cables and connect fiber optic cable coupling (4)

Fiber optical cables must not be kinked, routed over sharp edges or bent in radii of less than 25 mm, otherwise the fiber optic cable core will be yellowed and broken. Yellowed or broken fiber optical cables weaken the light.

AR82.95-P-0005-01A

14

Connect electrical connector (3)

15

Install right front sear (1)

AR91.10-P-1000FF

16

Carry out function check

Documentos referenciados