ar6830p4100ff

Remove/install door sill molding

Tipo ar · tema 68.30 · versão 0100 · 2004-01-14

Válido para: MODEL 454.0

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 68 Acabamento interno › 68.30 Revestimentos, frisos — Série 454 (modelos 0**)

EinPAS 37 Acabamento interno › 37.45 Revestimento › 37.45.37 revestimento da área para os pés — Série 454 (modelos 0**)

AR68.30-P-4100FF

Remove/install door sill molding

13.8.03

MODEL 454.0

Remove/install door sill molding

P68.30-2880-04

1 Rear door edge guard

2 Retaining clip

3 Front door edge guard

4 Footwell paneling

5 Entrance plate

Remove/install

1

Remove bottom paneling from B-pillar

AR68.30-P-4700FF

2

Remove rear door edge guard (1) and front door edge guard (3) in area of door sill molding (5) and footwell paneling (4).

Door sill moldings shown with seat removed for better illustration

3

Loosen footwell paneling (4) in area of door sill molding

4

Remove retaining clips (2) from door sill molding (5).

5

Unclip door sill molding (5) in marked areas (arrows) from rear toward front with suitable tool

Unclip door sill molding (5) carefully to prevent scratching and breakage.

6

Unhook guide lug on footwell paneling (4) from door sill molding (4) and move door sill molding (5) toward rear.

7

Remove door sill molding (5).

Handle door sill molding (5) carefully to prevent scratching and breakage.

Installation: Ensure that seat belt is routed properly.

8

Install in the reverse order

Documentos referenciados