Repair materials
Number | Designation | Order number |
BR00.45-Z-1015-02A | Repair kit, glazing, installing window, 2-component adhesive | A 220 670 00 93 |
P67.20-2258-11
Wear cotton gloves. Ensure that no fingerprints are present in the area of the adhesive surface (area E).
1 Cut glue residues on body flange down to a height of
approx. 1 mm to 2 mm.
A maximum of 2 mm of glue residue may be left.Pull off loose adhesive material (remaining pieces which are not completely cut off).
2 Clean gluing surface (area E) on body flange of rear-end door with cleaner from 2K 2K repair kit for installing glued windows and rub dry with rag.
3 Remove loose glue residues from body flange.
4 If glue residues are damaged or missing on the body flange, apply primer in area to be glued. Then allow primer to air-dry completely (at least 10 minutes).
5 Repair paint damages on body flange not covered by glue with primer pin
To avoid poor adhesion when installing window, adhesive surfaces of body flange of rear-end door must be free of dust, oil, grease, wax, dirt residues and other anti-adhesive components.