Repair materials
Number | Designation | Order number |
BR00.45-Z-1141-02A | TS adhesive (with isopropanol cleaner) | A 451 989 00 71 |
P65.10-3541-06
Adhesive kit for isopropanol cleaner
4 Adhesive cartridge
6 Primer stick
8 Cleaning cloth
9 Cloth
10 Spacer
11 Cutting wire
12 Application nozzle
13 Wool wiper
P67.20-2266-11
The bonding area on the rear window (1) must be absolutely free of dust and grease to prevent paint adhesion problem of the adhesive material when installing window.
1 Check rear window (1) for scratches and damage, replace if necessary.
2 Remove spacers (3) from rear window (1).
3.1 Cut off residual adhesive material on rear window (1) down to a height of approx. 2 mm using suitable scraper. Remove residual adhesive material.
Cut back remaining adhesive material on rear window (1) max. 15 minutes before applying new adhesive bead, because the adhesive material on the cutting surface reacts with the ambient air which can lead to adhesion problems.
When reusing removed rear window (1).
3.2 Clean bonding area (2) on rear window (1) with cleaning cloth included in repair kit.
When installing new rear window (1)
4.1 Repair damaged primer layer on rear window (1) with primer stick included in repair kit.
When reusing removed rear window (1).
Allow primer to flash off for min. 10 - 15 minutes.
4.2 Coat gluing area on window with primer stick included in repair kit (with max. 20 mm).
When installing new rear window (1)
Allow primer to flash off for min. 10 - 15 minutes.
5 Install new spacers (3) on rear window (1).