Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1022-04A | Cutting disk, dia. 50 mm, 80 m/s (max. 30,600 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P65.10-2610-06
1 Grind mating surfaces down to bare metal in shaded areas B, C, E, F and G, on one side.
2 Grind mating surfaces in remaining shaded areas, on both sides.
3 Remove grinding chips using wet/dry vacuum cleaner.
4 Coat insides of spot welding flange (except areas B, C, E and G) with zinc dust paint.
Shown on model 251 without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414
P65.10-2611-07
Shown on model 251 without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414
5 Grind connection surface down to bare metal in shaded area J, on one side.
6 Grind mating surfaces in remaining shaded areas, on both sides.
7 Remove grinding chips using wet/dry vacuum cleaner.
8 Coat insides of spot welding flange (except area J) with zinc dust paint.
P65.10-3103-09
Shown on model 251 without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414
9 Grind mating surfaces down to bare metal in shaded areas MA, N and P, on one side.
10 Grind mating surfaces in remaining shaded areas, on both sides.
11 Remove grinding chips using wet/dry vacuum cleaner.
12 Coat insides of spot welding flange (except areas MA, N and P) with zinc dust paint.