Welding device
240 589 02 23 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1041-01A | Seam sealant, sprayable 310 ml | A 002 989 84 20 |
BR00.45-Z-1003-01A | Sealant, white, 310 ml, DB supply specification 6069.20 | A 001 989 63 20 |
BR00.45-Z-1003-05A | Cavity preservation, solvent-free (1 l container) | A 000 986 72 70 05 |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
BR00.45-Z-1001-13A | Blind rivet 6.414 | A 003 990 35 97 |
P62.30-2394-09
1 Install reinforcement and bracket, fit with welding gauge and fasten with clamping pliers.
2 Drill dia. 6.5 mm holes (areas A, C and E).
3 Remove reinforcement and bracket.
4 Deburr rivet holes on both sides
5 Install reinforcement and bracket and fasten with manual temporary fasteners.
6 Drill dia. 6.5 mm holes (area D).
7 Remove reinforcement and bracket.
8 Deburr rivet holes on both sides
9 Coat insides of rivet connection with zinc dust paint.
P62.30-2400-09
10 Install reinforcement and bracket, fit with welding device and fasten with manual temporary fasteners.
11 Rivet reinforcement and mount with Polygrip flat head rivets, dia. 6.4 x 14 mm (areas B and C).
12 Weld in reinforcement with (area E).
13 Weld in reinforcement with (area F).
14 Tack weld reinforcement (area G).
15 Weld in reinforcement with (area H).
P62.30-2405-09
16 Weld in reinforcement with (areas G and I).
17 Rivet reinforcement and bracket with Polygrip flat head rivets, dia. 6.4 x 14 mm (area A).
18 Remove welding device
19 Rivet mount with Polygrip flat head rivets, dia. 6.4 x 14 mm (area D).
P62.30-2408-06
20 Weld in reinforcement with (area K).
21 Weld in reinforcement with (area J).