Remove/install fuel tank · ar4710p4100i · Mercedes-Benz WIS

AR47.10-P-4100I

Remove/install fuel tank

23.11.09

MODEL 215.375 /376 /378 /379, 220.026 /028 /128 /063 /065 /067 /083 /084 /087 /165 /167 /070 /170 /075 /175 /176 /179 /183 /184 /187 /875 /878
with CODE (282) Ski bag (through-loading feature)
with CODE (308) Cooling compartment in center rear backrest

P47.10-2043-09

Shown on fuel tank model 220

26 Fuel strainer

26/1 O-ring

75/4 Cup seals

76/1 Vent line (diesel engine)

D Fuel tank - activated charcoal canister line (gasoline engine)

E Fuel filter - fuel tank degassing line (gasoline engine)

80 Fuel tank

80/1 Rear wall of fuel tank

80/23 Mounting rails

90/11 Fuel return hose

90/12 Fuel hose on the suction side with connection fitting

Modification notes

4.3.03

Raise vehicle, newly recorded

Step 6

 	Remove/install
Danger!	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel	No fire, sparks, open flames or smoking. Only pour fuels into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
1	Drain fuel tank (80)		AR47.10-P-4001B
		 Pay attention to fuel quantity.	*BF47.10-P-1001-01A
2	Remove trim in trunk	Model 215, 220.0/ 1	AR68.30-P-4600M
		Model 220.8	AR68.30-P-4600MP
3	Remove rear wall of fuel tank (80/1)
4	Detach lower mounting rails (80/23) of fuel tank rear wall (80/1) from trunk floor	 Do not detach upper mounting rails (80/23) at rear shelf.
5	Take spare tire out of spare tire well
Danger!	Risk of death caused by vehicle slipping or toppling off the lifting platform.	Align vehicle between columns of lifting platform and position four support plates at the lifting platform support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
6	Raise vehicle
7.1	Detach fuel hose on the suction side with connection fitting (90/12), fuel return hose (90/11), and fuel tank - activated charcoal canister line (gasoline engine) (D)	 Vehicles with gasoline engine.  Do not damage fuel filter - fuel tank degassing line (gasoline engine) (E).  Collect remaining fuel, seal connections.
7.2	Detach fuel hose on the suction side with connection fitting (90/12), fuel return hose (90/11) and vent line (diesel engine) (76/1)	 Vehicles with diesel engine.  Collect remaining fuel, seal connections.
		 Box wrench bit	*000589710300
			*BA47.10-P-1001-01E
8	Take out fuel tank (80)	 Check whether cup seals (75/4) can be re-used.
9	Check sound deadening mat for damages
10	Remove fuel strainer (26)	Clean and check for re-usability.  The splash bowl in the fuel tank is secured against turning with 2 pins. It is attached together with the fuel strainer (26).
			*BA47.10-P-1002-01E
11	Replace O-ring (26/1)	 Oil to facilitate better installation.
12	Install in the reverse order
13.1	Dispose of fuel tank (80)	When replacing fuel tank.
	Disposing fuel tanks		OS47.10-P-0001-01A

Fuel tank

Number	Designation		Model 215	Model 220


BA47.10-P-1001-01E	Fuel strainer in fuel tank	Nm	40	40
BA47.10-P-1002-01E	Fuel hose with connection fitting on fuel strainer	Nm	30	30

Fuel tank

Number	Designation			Model 215 with code 282a or code 308	Model 220 with code 282a or code 308


BF47.10-P-1001-01A	Fuel tank capacity	Total filling capacity	Liters	78	78
		Reserve capacity	Liters	10	10

000 589 71 03 00

Box wrench bit

Documentos referenciados

ar4710p4001b Esvaziar e abastecer o reservatório de combustível
ar4710p4001b
ar6830p4600m
ar6830p4600mp
as0000z001001a Perigo de vida pelo escorregamento ou tombamento do veículo do elevador
as4700z000101a Risco de explosão devido a presença de vapores de combustível, risco de envenenamento por inalação e ingestão de combustível bem como risco de lesão pelo contato com a pele e os olhos
os4710p000101a Descarte de reservatórios de combustível