ar4030p0451d

Checking alignment of steering knuckle (removed)

Tipo ar · tema 40.30 · versão 0104 · 2006-07-26

Válido para: MODEL 210.081 /082 /083 /281 /282 /283

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 2 Chassí › 40 Rodas, alinhamento › 40.30 Alinhamento veículos acidentados — Série 210 (modelos 081, 082, 083, 281, 282, 283)

EinPAS 17 Trem de força/eixo › 17.50 Eixo dianteiro › 17.50.42 Manga de eixo/cubo da roda/rolamento da roda — Série 210 (modelos 081, 082, 083, 281, 282, 283)

EinPAS 20 Trem de rodagem › 20.10 Alinhamento da suspensão › 20.10.20 Diagnóstico/inspeção/medição/ajuste — Série 210 (modelos 081, 082, 083, 281, 282, 283)

AR40.30-P-0451D

Checking alignment of steering knuckle (removed)

26.9.96

MODEL 210.081 /082 /083 /281 /282 /283

Checking alignment of steering knuckle (removed)
Checking alignment of steering knuckle (removed)

P40.30-0336-01

Left steering knuckle shown

P40.30-0337-01

Checking alignment of steering knuckle (removed)
Checking alignment of steering knuckle (removed)

P40.30-0339-01

P40.30-0338-01

Removal, installation

1

Remove and install steering knuckle

AR33.25-P-0400D

Measuring

2

Place steering knuckle with wheel hub or brake disc installed on parallel supports

*WH58.30-Z-1015-12A

3

Scan and note height dimension "A" as comparative dimension with a height marking device

Measure at the flat surface of the brake caliper mounting.

*WH58.30-Z-1016-12A

4

Scan and note height dimension "B1-B3" at the lowest point of the each bore.

The test values result from the difference in height dimension "A" to the height dimensions:

"B1"= Bearing of supporting joint

"B2"= Bearing of upper wishbone

"B3"= Bearing of steering knuckle arm/tie rod

*BE40.30-P-1001-01A

Test values - steering knuckle

Number

Designation

Models 210.08/28

BE40.30-P-1001-01A

Difference in height measurement

"A" – "B1"

mm

23.31

"B2" – "A"

mm

65.61

"B3" – "A"

mm

1.81

Refer to illustration

AR40.30-P-0451D

Commercially available tools

Number

Designation

WH58.30-Z-1015-12A

Parallel bases

WH58.30-Z-1016-12A

Height marking device

Documentos referenciados