Perform a wheel alignment check

AR40.20-P-0200RR

15.9.11

MODEL 452.3/ 4

Modification notes

14.4.05

Front axle overall toe-in

	Measuring, adjusting
1	Perform initial measurement	 Carry out measurements according to information provided by measuring device manufacturer. Carry out measurement with unloaded vehicle and tank filled to 90%.
		Camber	*BE40.20-P-1001-06C
		Caster	*BE40.20-P-1002-06C
		Front axle toe	*BE40.20-P-1001-07B
		Toe-out on turns with the inside wheel steered through 20°	*BE40.20-P-1001-08C
		Rear axle camber	*BE40.20-P-1001-09U
		Total rear axle toe	*BE40.20-P-1001-10F
		Driveline angle	*BE40.20-P-1001-21A
2	Adjust front axle toe		AR40.20-P-0323-02RR
		Front axle toe	*BE40.20-P-1001-07B
			*BA46.40-P-1002-01F
			*450589010900
3	Perform final measurement	Camber	*BE40.20-P-1001-06C
		Caster	*BE40.20-P-1002-06C
		Front axle toe	*BE40.20-P-1001-07B
		Toe-out on turns with the inside wheel steered through 20°	*BE40.20-P-1001-08C
		Rear axle camber	*BE40.20-P-1001-09U
		Total rear axle toe	*BE40.20-P-1001-10F
		Driveline angle	*BE40.20-P-1001-21A
		 If other values are outside the tolerance range or if the steering wheel is not straight after adjusting the front axle toe-in 
		Carry out extended chassis alignment.	AR40.20-P-0250RR
4	Calibrate steering angle sensor	 Connect STAR DIAGNOSIS.
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04RR
		STAR DIAGNOSIS diagnosis system

Inspection and setting data of front axle camber/caster

Front axle toe check values

Test values for toe-out on turns

Number	Designation		Model 452.3/4


BE40.20-P-1001-08C	Toe-out on turns with the inside wheel steered through 20°	°	-2° 06' ( 0° 20')

Inspection and setting data of rear axle camber

Inspection values for toe-in at rear axle

Test values for driveline angle

 Tie rod

Open-ended socket wrench

450 589 01 09 00