AR07.07-P-1454GZD | Remove, install hot film mass air flow sensor together with air intake pipe | 19.4.06 |
ENGINE 629 in MODEL 164
P07.04-2454-11
Shown on engine 629 in model 211
1 Clamps
2 Air intake pipes
3 Air intake ducts
4 Electrical connectors
B2/6 Left hot film MAF sensor
B2/7 Right hot film MAF sensor
| Remove, install | ||
1 | Switch off ignition | Vehicles with Keyless-Go Code 889: Press Start/Stop button repeatedly until ignition is switched off. | |
2 | Remove air filter housing | ||
3 | Loosen clamps (1) | ||
4 | Detach air intake pipe (2) with left hot film mass air flow sensor (B2/6) and right hot film MAF sensor (B2/7) from air intake ducts (3) | Installation: Align the markings on the air intake pipe (2) and the air intake ducts (3) together. | |
5 | Disconnect electrical connectors (4) at left hot film MAF sensor (B2/6) and right hot film MAF sensor (B2/7) | ||
6 | Remove air intake pipes (2) with left hot film MAF sensor (B2/6) and right hot film MAF sensor (B2/7) | ||
7 | Install in the reverse order |