ar0703s9105sd

Remove/install leak oil line to injectors

Tipo ar · tema 07.03 · versão 0109 · 2009-04-27

Válido para: ENGINE 646 in MODEL 636, 639

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 1 Motor › 07 Preparação da mistura › 07.03 Bicos injetores, válvulas de injeção, tubulações — Série 636 · Série 639 · Série 646

EinPAS 15 Motor › 15.45 Unidade de controle do motor › 15.45.13 Tubulação/mangueira/válvula — Série 636 · Série 639 · Série 646

AR07.03-S-9105SD

Remove/install leak oil line to injectors

22.4.09

ENGINE 646 in MODEL 636, 639

Remove/install leak oil line to injectors

N07.03-2064-09

Shown on engine 646.982

2 Bolt

1 Leak oil line

Remove/install leak oil line to injectors

S07.03-4507-11

Shown on engine 646.980

1 Leak oil line

3 Clamp

Remove/install

Danger!

Risk of explosion. Fuel may ignite and explode. Risk of injury to skin and eyes caused by fuel spraying out at high pressure.

Keep all ignition sources out of hazard area.

Do not carry out any work on system when it is pressurized.

AS07.16-Z-0001-01A

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Only pour fuels into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Remove air filter housing

AR09.10-S-1150S

2

Remove cylinder head cover trim

AR01.20-S-5014-02SD

3

Detach leak oil line (1) to injectors

Press in safety clamps and detach leak oil line (1) toward top.

4.1

Remove bolt (2) for rail at bracket

Only for engine 646.982/983

*BA07.16-N-1008-01A

4.2

Remove clamp (3) on fuel line

Only for engine 646.980/981

5

Detach leak oil line (1) and remove

If necessary also remove leak oil line (1) to cylinder head cover.

Installation: Replace leak oil line (1).

6

Install in the reverse order

Checking

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Check for leaks with engine running

Common rail diesel injection (CDI)

Number

Designation

Engine
646
in model
636, 639

BA07.16-N-1008-01A

Bolt, rail to bracket

Nm

14

Documentos referenciados