S05.10-3000-11
1 Terminal piece
13 Chain tensioner box
14 Stopper retainer
S05.10-3023-06
1 Terminal piece
2 Ball head (anti-return valve)
3 Ball head guide
4 Pressure spring
5 Stopper retainer
6 Filler pin
7 Pressure spring
8 Lock spring
9 Bolt
10 Ball head (regulator valve)
11 Pressure spring
12 Pressure elemn. (pressed in)
13 Chain tensioner box
14 Stopper retainer
15 Timing case cover
16 Cylinder head
17 Combined screw
18 Tensioner rail
19 Cylinder head gasket
20 Timing chain
21 Plastic support (tensioner rail)
A Oil inflow duct
B Oil pan for chain tensioner
| Removing | ||
1 | Disconnect the battery | ||
2 | Remove the generator from its support and separate it, keeping the electrical cables connected. | Cover the generator with a clean cloth | |
3 | Remove the complete chain tensioner (13) | ||
| Installation | ||
4 | Install the chain tensioner (13) | Dismantle the chain tensioner and assemble it again, as described | |
| |||
| |||
| |||
5 | Install the generator in its support | ||
6 | Connect the battery | ||
7 | Check the leaktightness. |
Timing chain drive
Code | Name | Engine 111.948/ | ||
BA05.10-N-1001-01A | Terminal part in the chain tensioner box | Nm | 40 | |
BA05.10-N-1002-01A | Chain tensioner box in the timing case cover | Nm | 80 | |
Commercially available tools