S01.20-4505-09
2 Line guide
3 Bolt
4 Leak oil line
5 Drain hose for cylinder head cover
B6/1 Hall sensor for camshaft
B6/17 Camshaft Hall sensor
6 Crankcase ventilation hose
7 Bolt
60 Cylinder head cover
| Remove/install | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
Danger! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. | |
1 | Remove injectors | ||
2 | Unhinge wiring (2) | To do this remove bolts (3), remove wiring (2) and press lightly to the side. | |
3 | Remove leak oil line (4) to cylinder head cover (60) | Place leak oil line (4) to the side. | |
4 | Unclip drain hose for cylinder head cover (5) below cylinder head | ||
5 | Detach crankcase ventilation hose (6) from cylinder head cover (60) | ||
6 | Disconnect electrical connector from Hall sensor for camshaft (B6/1) or camshaft Hall sensor (B6/17) | ||
7 | Remove bolts (7) | | |
8 | Remove cylinder head cover (60) | Installation: Clean sealing surfaces and install new seals. | |
9 | Install in the reverse order | ||
| Checking | ||
10 | Ensure gasket of cylinder head cover (60) is correctly installed | ||
11 | Check engine oil level, adjust to correct level if necessary | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
12 | Check for leaks with engine running |
Crankcase ventilation, cylinder head cover
Documentos referenciados
- ar0120s501401sd
- ar0716s1000sd Remover e instalar injetores
- as0000z000501a Risco de acidente pelo movimento involuntário com o motor em funcionamento. Risco de lesão por esmagamento e queimadura no contato durante o procedimento de partida ou com o motor em funcionamento
- as0000z001701a Risco de lesão por corte ou arranhão em peças com cantos cortantes ou rebarbas nos veículos
- as4700z000101a Risco de explosão devido a presença de vapores de combustível, risco de envenenamento por inalação e ingestão de combustível bem como risco de lesão pelo contato com a pele e os olhos