N83.00-2133-11
1 Cover
2 Dust filter
| Removing, installing | ||
1 | Remove left and right footwell trim | ||
2.1 | Remove center console | With code FF6 (center console) | |
2.2 | Remove covering | Without code FF6 (center console) | |
3 | Cut off cable tie at electrical wiring harness | Installation: Replace cable tie | |
4 | Pull off condensation-water drain of heater / ventilation housing | ||
5 | Push cover (1) at heater / ventilation housing to the left and take it off | ||
6 | Remove dust filter (2) | Pull dust filter (2) half way out, bend to the rear and remove. | |
7 | Install in the reverse order | Take care not to damage the felt sealing at the dust filter frame. |