Replace dust filter for heating/ventilation

AP83.00-S-8381B

Replace dust filter for heating/ventilation

1.12.99

 

Removing, installing

1

Remove left and right footwell trim

2.1

Remove center console

 With code FF6 (center console)

AR68.20-S-2000A

2.2

Remove covering

 Without code FF6 (center console)

3

Cut off cable tie at electrical wiring harness

 Installation: Replace cable tie

4

Pull off condensation-water drain of heater / ventilation housing

5

Push cover (1) at heater / ventilation housing to the left and take it off

6

Remove dust filter (2)

 Pull dust filter (2) half way out, bend to the rear and remove.

7

Install in the reverse order

 Take care not to damage the felt sealing at the dust filter frame.