of1330g100002b

Questionnaire for checking delivery rate and oil ejection of compressor, form

Typ of · temat 13.30 · wersja 0101 · 2016-01-19

Dotyczy: Engine 900, 902, 904, 906, 924, 926 Engine 934, 936

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 13 Sprężarka powietrza, napędy pasowe › 13.30 Sprężarka (układ sprężonego powietrza) — Seria 900 · Seria 902 · Seria 904 · Seria 906 · Seria 934 · Seria 936

EinPAS 21 Hamulce/instalacja podciśnieniowa/układ sprężonego powietrza › 21.35 Układ sprężonego powietrza › 21.35.35 Sprężarka — Seria 900 · Seria 902 · Seria 904 · Seria 906 · Seria 934 · Seria 936

Dotyczy też silników/skrzyń biegów: 924 ***, 926 ***

OF13.30-G-1000-02B

Questionnaire for checking delivery rate and oil ejection of compressor, form

Engine

900, 902, 904, 906, 924, 926

Engine

934, 936

_________________________________________________________

_________________________________________________________________

company-owned sales and service outlet/agency dealer number

Customer



_______________________________

__________________________

Vehicle identification number

Repair order number



_______________________________

_____________________________

Inspector

Date

___________________________

_____________

_____________

______________________________

____________________________

Vehicle registration number

First registration

Model

Engine number

Operating hours/km/miles
(Strike through what is not applicable)

This questionnaire must be filled out for every rejected compressor during the warranty & goodwill period. Before this however, each compressor must always be checked in accordance with the methods described in the WIS with regard to delivery rate and oil ejection. The technical facts resulting from the tests are required for filling out this questionnaire.
For a warranty or goodwill claim the removed compressor must be submitted for inspection together with the completely filled out questionnaire and the test sheet used when testing for oil discharge.

Mounting equipment and roof-mounted superstructures

Model/designation:

Details on vehicle use

Complaint

What is the customer's complaint?

Have parts been replaced? No ☐

Yes ☐

If yes, which ones:

Designation:

Part number:

Other comments:

Values determined from delivery rate check

Test procedure

Specified value according to work instructions

Actual value determined

Remarks


Fill time until shutoff pressure for pressure regulator is reached (18.3 bar)


_____ s


_____ s


Result of oil ejection test

Which findings were determined on the basis of the oil ejection test?

Other tests/work

Which additional or other tests/operations were conducted?

Final findings report from workshop

Which final findings were determined by the workshop?