bt3325p045501slr

Bushing in steering knuckle reinforced and procedure for assembling the supporting ball joints changed

Typ bt · temat 33.25 · wersja 0100 · 2007-04-03

Dotyczy: MODEL 199

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 33 Oś przednia › 33.25 Belka osi, zwrotnica — Seria 199

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.50 Oś przednia › 17.50.42 Zwrotnica/piasta/łożysko koła — Seria 199

BT33.25-P-0455-01SLR

Bushing in steering knuckle reinforced and procedure for assembling the supporting ball joints changed

MODEL 199

Bushing in steering knuckle reinforced and procedure for assembling the supporting ball joints changed

P33.25-2044-11

The collared bushing (1) for supporting the bottom supporting ball joint (2) in the steering knuckle (3) has been reinforced. In this connection the procedure for assembling the top and bottom supporting ball joint (2) has been changed.

As of VIN 947 vehicles have already been equipped with the reinforced collared bushings (1) at the plant.
With immediate effect the parts service only makes available the reinforced collared bushings (1), in the case of repair the vehicles up to VIN 946 are therefore also converted to reinforced collared bushings (1).

With immediate effect the top and bottom supporting ball joint (2) are assembled on all vehicles the stage instead of one-stage till now, irrespective of the collared bushing version fitted in each case.