S98.00-4509-09
Rear left fender in paint stage 2 or 3 |
S98.00-4511-09
Rear right fender in paint stage 2 or 3 |
Rear left fender in paint stage 1E |
S98.00-4507-06
Rear left fender in paint stage 1E |
S98.00-4508-06
S98.00-4510-09
Rear right fender in paint stage 1E |
Topical note | Notes on paintwork repairs | ||
Topical note | General notes about painting the body flange in the glazing area | ||
General information on masking for paintwork | |||
Cover and mask off rear fender in paint stage 2 or 3 | |||
1.1 | Unfasten rear bumper. | Paint stage 2 | |
It is not necessary to remove the rear bumper; this can remain on the vehicle. | |||
1.2 | Remove rear bumper. | Paint stage 3 | |
If the damaged area is in the area of the bumper, it may be necessary to remove the bumper. | |||
2 | Remove roof railing. |
| |
If the damaged area is in the area of the roof railing, it may be necessary to remove the roof railing. | |||
3 | Remove rear lamp unit. | ||
4 | Remove side window. | Paint stage 3 | |
Model 447.8 | |||
If the damaged area is in the area of the side window, it may be necessary to remove the side window. | |||
5 | Remove electric pop-out window. | Paint stage 3 | |
Model 447.7/8 | |||
If the damaged area is in the area of the electric pop-out window, it may be necessary to remove the electric pop-out window. | |||
6 | Remove longitudinal member panel. |
| |
If the damage area is in the area of the longitudinal member, it may be necessary to remove the mounting rail. | |||
7 | Mask off all openings on the rear fenders with adhesive tape. | See: https://xentry.daimler.com, under the "Paint Technology Guideline" category. | |
8 | Mask off rear fender all the way round. | See: https://xentry.daimler.com, under the "Paint Technology Guideline" category. | |
9 | Cover complete vehicle with film. | See: https://xentry.daimler.com, under the "Paint Technology Guideline" category. | |
Cover and mask off rear fender in paint stage 1E | |||
10 | Remove rear bumper. | ||
11 | Remove carrier for rear bumper. | ||
12 | Remove side part holder for rear bumper. | ||
13 | Remove rear bumper vent flap. | ||
14 | Remove sliding door. | ||
15 | Remove center guide rail of sliding door. | ||
16 | Remove fuel filler flap. | ||
17 | Remove rear lamp unit. | ||
18 | Remove side window. |
| |
19 | Remove electric pop-out window. |
| |
20 | Remove edge guard of door cutout on sliding door. | ||
21 | Remove edge guard from rear cutout. | ||
22 | Remove rear fender liner. | Only if installed. | |
23 | Remove mounting rails of longitudinal member panels. |
| |
24 | Mask off all openings on the rear fenders with adhesive tape. | See: https://xentry.daimler.com, under the "Paint Technology Guideline" category. | |
25 | Mask off rear fender all the way round. | See: https://xentry.daimler.com, under the "Paint Technology Guideline" category. | |
26 | Cover complete vehicle with film. | See: https://xentry.daimler.com, under the "Paint Technology Guideline" category. |
Powiązane dokumenty
- ah9800p020001bk Ogólne wskazówki dotyczące osłaniania podczas lakierowania
- ah9800p940802a Wskazówki dotyczące napraw powłok lakierniczych
- ah9800p940806a Ogólne wskazówki dotyczące lakierowania kołnierza nadwozia w obszarze szyb
- ar6730s2701e
- ar6739s1000e
- ar7216s1260e
- ar7216s7806e
- ar7740s5000e
- ar8210s4905e
- ar8810s1400e
- ar8820s2200e
- ar8820s2250e
- ar8820s9018e
- ar8860s6023e
- ar8860s9244e
- ar8880s6000ch
- ar8880s6005ch
- ar8880s6005ch