ar9175s9885e

Remove/install covering of roof bed frame

Typ ar · temat 91.75 · wersja 0100 · 2014-10-14

Dotyczy: MODEL 447.7/8 with CODE ZK8 (Bed in roof)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.75 Leżanki — Seria 447 (modele 7**, 8**)

EinPAS 37 Wyposażenie wnętrza › 37.40 Łóżko/leżanka/kabina sypialna › 37.40.30 Leżanka/ łóżko — Seria 447 (modele 7**, 8**)

AR91.75-S-9885E

Remove/install covering of roof bed frame

20.08.2014

MODEL

447.7/8

with CODE ZK8 (Bed in roof)

Remove/install covering of roof bed frame

1

Cover

2

Screw

3

Covering

4

Profile

S91.75-4504-05

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove roof bed frame

AR91.75-S-9880E

2

Remove caps at screws/bolts 2), remove screws/bolts (2) and take off cover (1)

3

Release covering (3) at profile (4) of roof bed frame at the circumference and remove covering (3)

Installation: Pay attention to correct seating of covering (3) in profile (4).

Long wedge

*115589035900

4

Install in the reverse order

Remove/install covering of roof bed frame

115 589 03 59 00

Long wedge

Powiązane dokumenty