ar9175s9880e

Remove/install roof bed frame

Typ ar · temat 91.75 · wersja 0101 · 2015-11-06

Dotyczy: Model 447.7/8 with code ZK8 (Bed in roof)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.75 Leżanki — Seria 447 (modele 7**, 8**)

EinPAS 37 Wyposażenie wnętrza › 37.40 Łóżko/leżanka/kabina sypialna › 37.40.30 Leżanka/ łóżko — Seria 447 (modele 7**, 8**)

AR91.75-S-9880E

Remove/install roof bed frame

6.11.15

Model

447.7/8

with code ZK8 (Bed in roof)

Remove/install roof bed frame

S91.75-4514-09

1

Roof bed frame

3

Bolts

2

Mattress

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Open pop-up roof


Model 447.7/8
with code ZK8 (Bed in roof)
with code ZK9 (Lifting roof hatch)

AR77.70-S-0001-01E

Model 447.8
with code ZK0 (EASY UP pop-up roof, electric)
with code ZK8 (Bed in roof)

AR77.75-S-0001-03E

2

Open zipper at front end of mattress (2) and remove mattress (2)

3

Mark assembly position of roof bed frame (1) at the hinges

4

Remove screws/bolts (3)

Installation: Observe markings.
The distance between the roof bed frame (1) and the side headliners must the same.

5

Remove roof bed frame (1)

Helper required.

6

Install in the reverse order

Powiązane dokumenty