1 | Electrical connector |
2 | Screw |
B48/1 | Left frontal acceleration sensor |
B48/2 | Right frontal acceleration sensor |
P91.60-5308-06
Warning | Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Notes on safety-relevant components | |||
Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | |||
| Remove/install | ||
1 | Detach ground line of on-board electrical system battery. | ||
2 | Remove bolt (2). | Screw, frontal acceleration sensor to bumper reinforcement | |
3 | Remove left frontal acceleration sensor (B48/1) and right frontal acceleration sensor (B48/2). | Installation: Complete, flat contact between the bushing and the contact area on the vehicle is necessary at all times to guarantee signal transmission. | |
4 | Release electrical connector(1) and disconnect. | ||
5 | Check left frontal acceleration sensor (B48/1) and right frontal acceleration sensor (B48/2) for damage and deformation. | If there are problems, | |
| |||
Replace left frontal acceleration sensor (B48/1) and right frontal acceleration sensor (B48/2). | |||
6 | Install in the reverse order. |
Powiązane dokumenty
- ah0000z001901a Wskazówki dotyczące elementów wpływających na bezpieczeństwo
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah9100z000010a Wskazówki, oceny i prawne przepisy dotyczące wykonywania prac, składowania i postępowania z elementami pirotechnicznymi
- ar5410p0003mfa
- as9100z000801a Niebezpieczeństwo obrażeń podczas napraw i czynności diagnostycznych związanych z elementami pirotechnicznymi