ar9160p0693fr

Removing, installing windowbag

Typ ar · temat 91.60 · wersja 0102 · 2018-10-12

Dotyczy: Model 257, 290

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.60 Poduszki powietrzne, system ochrony pieszych — Seria 257 · Seria 290

EinPAS 27 Bezpieczeństwo bierne/ systemy zabezpieczające przed skutkami wypadków › 27.16 Poduszka powietrzna › 27.16.20 Poduszka powietrzna — Seria 257 · Seria 290

AR91.60-P-0693FR

Removing, installing windowbag

26.06.2018

Model

257, 290

Removing, installing windowbag

P91.60-5075-09

Shown on model 257 on left side of vehicle

1

Window airbag unit

3

Screw

2

Electrical connector

4

Clips

Removing, installing windowbag

4

Clip

P91.60-4565-06

Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

Remove/install

1

Adjust driver and front passenger seat into fully reclined position

2

Disconnect ground line on battery.

AR54.10-P-0003FR

3

Remove roof lining and place onto seats.


Model 257

AR68.30-P-4300FR

Model 290

AR68.30-P-4300FRX

4

Release and disconnect electrical connector (2) at gas generator.

Removal lever

*203589043300

5

Remove screw (3) and unhook holder of gas generator from body.

Bolt, holder for windowbag gas generator to A-pillar/roof frame

*BA91.60-P-1004-01O

6

Press tabs (arrows B) together through the openings (arrows A) with suitable pliers and remove clamps (4).

7

Remove window airbag unit (1) with gas generator and place in vehicle.

8

Remove window airbag unit (1) with gas generator from vehicle.


Handle window airbag unit (1) carefully.
Otherwise, the interior equipment or paint may be damaged.

9

Install in the reverse order.

Check

10

Check Supplemental Restraint System (SRS) using vehicle diagnosis system.

When replacing windowbag unit (1).

AD00.00-P-2000-06FR

Airbag

Number

Designation

Model 257

Model 290

BA91.60-P-1004-01O

Bolt, holder for windowbag gas generator to A-pillar/roof frame

Nm

6

6

Removing, installing windowbag

203 589 04 33 00

Removal lever

Powiązane dokumenty