Shown with code 811 (Advanced Sound System) and with code 414 (sliding roof) |
1 | Headliner |
2 | Sun visor |
3 | A-pillar trim panel |
4 | Upper B-pillar paneling |
5 | C-pillar paneling |
6 | D-pillar paneling |
E11/1 | Left rear dome lamp |
E11/2 | Right rear dome lamp |
P68.30-4086-06
Shown with code 811 (Advanced Sound System) on the left side of vehicle |
1 | Headliner |
8 | Electrical connector |
P68.30-4031-11
Shown with code 811 (Advanced Sound System) and with code 414 (sliding roof) |
8 | Electrical connector |
9 | Electrical connector |
10 | Solenoids |
11 | Solenoids |
12 | Electrical connector |
P68.30-4085-06
Notes on safety-relevant components | |||
| Remove/install | ||
1 | Remove windshield. | ||
2 | Completely open sliding roof lining. | Model 290 | |
3 | Remove inside rearview mirror. | ||
4 | Remove sun visors (2). | ||
5 | Remove top B-pillar trim (4). | ||
6 | Remove C-pillar trim (5). | ||
7 | Remove D-pillar trim (6). | ||
8 | Remove rear dome lamp (E11/1, E11/2). | Long wedge | |
9 | Disconnect electrical connector (8). | Model 290 | |
10 | Detach electrical connection (9). | ||
11 | Slightly fold back foam material and disconnect electrical connector (12). | ||
12 | Remove edge guard from body flange in area of roof lining (1). | ||
13 | Press catch hooks (arrows) together and unclip roof lining (1) from front roof frame. | ||
14 | Detach roof lining (1) on left and right on sliding sunroof frame. | Model 290 | |
Long wedge | |||
15 | Detach the roof lining (1) from the magnets (10, 11) and lay it down in the vehicle. | Aid of helper required. | |
16 | Remove roof lining (1) from vehicle through window cutout in windshield. | | |
Aid of helper required. | |||
17 | Check dampings on the roof lining (1) for correct seating and condition. | Model 290 | |
If there is a problem, | |||
| |||
replace affected dampings on the roof lining (1). | |||
18 | Prepare new headliner (1) for installation. | When replacing roof paneling (1). | |
Adhesive tape roll, non-woven Tesa tape, 50 meters, 50 mm wide | |||
19 | Install in the reverse order. |
115 589 03 59 00
Long wedge
Powiązane dokumenty
- ah0000z001901a Wskazówki dotyczące elementów wpływających na bezpieczeństwo
- ar6710p1700fr
- ar6830p430516frx
- ar6830p4490frx
- ar6830p4497frx
- ar6830p4700fr
- ar6840p0001fr
- ar6860p5480fr