ar9160p0660mcc

Remove/install airbag unit on steering wheel

Typ ar · temat 91.60 · wersja 0203 · 2019-04-04

Dotyczy: Model 451.3/4

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.60 Poduszki powietrzne, system ochrony pieszych — Seria 451 (modele 3**, 4**)

EinPAS 27 Bezpieczeństwo bierne/ systemy zabezpieczające przed skutkami wypadków › 27.16 Poduszka powietrzna › 27.16.20 Poduszka powietrzna — Seria 451 (modele 3**, 4**)

AR91.60-P-0660MCC

Remove/install airbag unit on steering wheel

18.03.2019

Model

451.3/4

Modification notes

15.01.2007

Screw/bolt, airbag to steering wheel

Model 451.3/4

BA91.60-P-1005-01C

Remove/install airbag unit on steering wheel

P91.60-3392-07

1

Steering wheel

3

Bolts

5

Electrical connector

2

Driver airbag unit

4

Electrical connector

Remove/install

Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

1

Remove steering wheel (1) and place on a suitable surface

AR46.10-P-0100MCC

For safety reasons, the steering wheel (1) must not be set down on the driver's airbag unit (2) or on the fanfare horns and airbag clock spring contact.
The packaging of a new steering wheel (1), for example, can serve as a suitable surface.

2

Remove steering wheel spoke covers

AR46.10-P-0105MCC

3

Unscrew screws (3) from driver's airbag unit (2)

The screws (3) remain in the steering wheel (1).

Bolt, airbag to steering wheel

*BA91.60-P-1005-01C

4

Remove driver's airbag unit (2) from steering wheel (1) until electrical connectors (4, 5) are accessible

If driver's airbag unit (2) has been triggered, steering wheel (1) must always be completely replaced

5

Disconnect electrical connectors (4, 5) and place driver's airbag unit (2) to one side

If the driver's airbag unit (2) is to be replaced, the defective driver's airbag unit (2) must be disposed of properly and in an environment-friendly environment.

6

Install in the reverse order

7

Check supplemental restraint system using STAR DIAGNOSIS

Only when replacing driver's airbag unit (2).

AD00.00-P-2000-04MCC

Airbag

Number

Designation

Model 451.3

Model 451.4

BA91.60-P-1005-01C

Bolt, airbag to steering wheel

Nm

4

4

Powiązane dokumenty