ar9160d0760ts

Remove/install side Supplemental Restraint System (SRS) pressure sensor

Typ ar · temat 91.60 · wersja 0101 · 2019-11-11

Dotyczy: Model 907, 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.60 Poduszki powietrzne, system ochrony pieszych — Seria 907 · Seria 910

EinPAS 27 Bezpieczeństwo bierne/ systemy zabezpieczające przed skutkami wypadków › 27.16 Poduszka powietrzna › 27.16.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 907 · Seria 910

AR91.60-D-0760TS

Remove/install side Supplemental Restraint System (SRS) pressure sensor

05.11.2019

Model

907, 910

Remove/install side Supplemental Restraint System (SRS) pressure sensor

Shown on left front door

1

Side deployment pressure sensor

2

Electrical connector

D91.60-1212-76

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Disconnect ground line of on-board electrical system battery

AR54.10-D-0029TS

2

Disconnect ground line of auxiliary battery


Model 907, 910
with code E2I (Auxiliary battery for retrofitted consumers, interior)

AR54.10-D-0004TS

Model 907
with code E2M (Auxiliary battery for retrofit consumers, engine compartment)
except code E2I (Auxiliary battery for retrofitted consumers, interior)

AR54.10-D-0004TSR

3

Disconnect ground line of auxiliary battery for park pawl emergency shift mode

Model 907
with code G42 (7G-TRONIC PLUS)
Model 907
with code G43 (9G-TRONIC)

AR54.10-D-0026TSR

4

Remove door trim from front door

AR72.10-D-6575TS

5

Disconnect electrical connector (2)

6

Release side deployment pressure sensor (1) counterclockwise (arrow) and remove from inner door panel

7

Install in the reverse order

Check

8

Check Supplemental Restraint System (SRS) using vehicle diagnosis system

When replacing side deployment pressure sensor (1).

AD00.00-D-2000-06TS

Powiązane dokumenty