Remove/install front passenger bench seat side airbag

AR91.60-D-0004TS

Remove/install front passenger bench seat side airbag

19.06.2018

Model

907, 910

with code S23 (Co-driver's seat double seat)

with code SH2 (Thorax/pelvis side-impact airbag, front passenger)

1

Electrical connector

2

Lock

3

Nuts

4

Side airbag

5

Backrest padding

6

Backrest frame

7

Bracket

8

Panel

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Remove front passenger bench seat.

Model 907.6, 910.6 with code D50 (Full-width partition wall) Model 907.6, 910.6 with code D51 (Full-width partition wall with 1 window)

AR91.10-D-1035TS

2

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

3

Detach ground line of on-board electrical system battery.

AR54.10-D-0029TS

 Before conducting any maintenance operations, switch off ignition, disconnect battery negative pole then wait for at least 3 minutes.

4

Disconnect ground line of auxiliary battery.

Model 907, 910 with code E2I (Auxiliary battery for retrofit consumer, interior)

AR54.10-D-0004TS

Model 907 with code E2M (Auxiliary battery for retrofit consumer, engine compartment) except code E2I (Auxiliary battery for retrofit consumer, interior)

AR54.10-D-0004TSR

5

Disconnect ground on additional battery for park pawl emergency shift.

Model 907 with transmission 722.9

AR54.10-D-0026TSR

6

Partially remove seat backrest cover on right side from front passenger bench seat until side airbag (4) is accessible.

AR91.10-D-1099TS

7

Disconnect electrical connector (1).

 To do so, use a suitable tool to release lock (2).

8

Unscrew nuts (3).

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 Nut, sidebag to backrest frame

*BA91.60-D-1006-01TS

9

Remove side airbag (4).

 To do so, release seat backrest padding (5) from seat backrest frame (6). Then remove side airbag (4) from seat backrest frame (6) and remove holder (7) from side airbag (4).

10

Dispose of side airbag (4) properly.

If side airbag (4) is replaced.

11

Remove sheet metal (8).

If sheet metal (8) or the seat backrest frame (6) is replaced.

 To do so, slide sheet metal (8) upwards out of catch.

12

Install in the reverse order



Check

13

Check Supplemental Restraint System (SRS) using vehicle diagnosis system.

If side airbag (4) is replaced.



Connect/disconnect diagnostic unit

AD00.00-D-2000-06TS

 Airbag

Number

Designation

Model 907, 910

BA91.60-D-1006-01TS

Nut, sidebag to backrest frame

Nm

7