AR91.12-S-1060B | Remove/install front seat base on rear seat | 4.12.09 |
MODEL 638.294 ## as of 328515
lightweight design seats
S91.12-4037-09
1 Gasfilled suspension strut
2 Screw
3 Pin guide panel, right
4 Pin guide panel, left
8 Nut
9 Mounting bolts
10 Mounting plate
5 Seat frame
6 Front seat base
7 Spacer washer
| Remove/install | ||
1 | Remove cover at the bottom, front, on the rear seat | ||
2 | Remove rear seat base | ||
3 | Remove nut (8) from mounting bolt (9) of gas-filled strut (1) | | |
4 | Remove gas-filled strut (1) on one side | ||
5 | Remove screws/bolts (2) of pin guide panel | Observe installation position of mounting plate (10). | |
| |||
| |||
6 | Remove pin guide panel (3, 4) | Do not damage guide pin on pin guide panel (3, 4). | |
Observe installation position of spacer washer (7). | |||
7 | Remove rear seat from front seat base (6) | Installation: Insert spacer washer (7) between seat frame (5) and front seat base (6). | |
8 | Release and remove front seat base (6) | ||
9 | Install in the reverse order |
Rear seats
Number | Designation | Model | ||
BA91.12-N-1002-03A | Guide plate bolt on front seat base | Nm | 28 | |
BA91.12-N-1005-03A | Nut for fastening bolt on gasfilled suspension strut | Nm | 19 | |
Torx bit set
000 589 01 10 00