AR91.12-S-1070B | Remove/install rear seat base on rear seat | 4.12.09 |
MODEL 638.294 ## as of 328515
lightweight design seats
S91.12-4019-09
1 Side paneling
2 Lower trim panel
3 Spring
4 Spring
5 Release lever, right
11 Clamp
12 Guide lever
13 Rear seat base
14 Lever
6 Release lever, left
7 Nut
8 Clamp
9 Locking lever
10 Guide bolts
| Remove/install | ||
1 | Remove side moldings (1) at left and right from rear seat | ||
2 | Remove cover at the bottom (2) from rear seat | ||
3 | Unhook spring (3, 4) from release lever (5, 6) | ||
4 | Guide out release levers (5, 6) | The release levers (5, 6) are different. Pay attention to installation position. | |
5 | Remove clamp (8) from locking lever (9) | Replace clamp (8) if damaged. | |
6 | Remove locking lever (9) from lever (14) | ||
7 | Remove nut (7) | Remove nut (7) from right and left side. | |
| |||
8 | Drive out guide pin (10) at left and right | Do not damage guide pin (10). | |
9 | Detach clamp (11) from guide lever (12) | Straighten rear seat far enough until the guide lever (12) can be guided out. | |
10 | Remove rear seat base (13) from rear seat | ||
11 | Install in the reverse order |
Rear seats