ar9112p1723fr

Remove/install center rear folding seat backrest

Typ ar · temat 91.12 · wersja 0101 · 2018-10-15

Dotyczy: Model 257 with code 287 (Folding seat backrests in rear passenger compartment) Model 290 with code 287 (Folding seat backrests in rear passenger compartment) except code 224 (Rear individual seat design)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.12 Fotele tylne — Seria 257 · Seria 290

EinPAS 37 Wyposażenie wnętrza › 37.27 Fotel tylny › 37.27.42 Oparcie fotela/zagłówek — Seria 257 · Seria 290

AR91.12-P-1723FR

Remove/install center rear folding seat backrest

28.09.2018

Model

257

with code 287 (Folding seat backrests in rear passenger compartment)

Model

290

with code 287 (Folding seat backrests in rear passenger compartment)

except code 224 (Rear individual seat design)

Remove/install center rear folding seat backrest

Shown on model 257

1

Center backrest

2

Bolts

3

Hinge

P91.12-4178-06

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Remove right rear folding seat backrest.

AR91.12-P-1722FR

2

Release center seat backrest (1).

3

Remove screws (2) from pivot bearing (3).

Bolt, center pivot bearing to body

*BA91.12-P-1004-03M

4

Guide pivot bearing (3) out of crossbar and out of center seat backrest (1) at the same time.


Do not tilt the pivot bearing (3).
Otherwise, the spacer ring in the pivot bearing (3) may be damaged.

5

Pull center seat backrest (1) off left seat backrest and remove.


Do not tilt center seat backrest (1).
Otherwise, the spacer ring in the center seat backrest (1) may be damaged.

6

Install in the reverse order

Rear seats

Number

Designation

Model 257

Model 290

BA91.12-P-1004-03M

Bolt, center pivot bearing to body

Nm

40

40

Powiązane dokumenty