Remove/install cover for backrest at front seat

AR91.10-P-8656MFA

Remove/install cover for backrest at front seat

19.12.2018

Model

118, 177, 247

with code 7U2 (Luxury front seats)

1

Seat upholstery

4

Retaining clips

2

Backrest trim

5

Padding

3

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove left or right front seat.

AR91.10-P-1000MFA

2

Remove seat backrest trim (2).

AR91.10-P-1912MFA

3

Remove outer trim from seat frame.

AR91.10-P-1201MFA

4

Remove inner trim from seat frame.

AR91.10-P-1202MFA

5

Remove head restraint guides from front seat.

AR91.16-P-0051MFA

6

Unhook shackles (arrows) of seat cover (1) from seat frame.

 Dismantling tool

*205589026300

7

Release and disconnect electrical connector (3), and place electrical wiring harness to one side.

 The number of electrical connectors varies according to vehicle equipment.

8

Remove seat cover (1) with padding (5) from seat frame base.

9

Detach seat cover (1) from padding (5) until retaining clamps (4) are accessible.

10

Separate retaining clamps (4) and remove remaining pieces from padding (5).


Remove remaining pieces of retaining clamps (4) carefully.
Otherwise padding (5) and seat cover (1) will be damaged.

 Installation: Replace retaining clamps (4).

 Padding clip pliers

*454589033700

11

Remove seat cover (1) from padding (5).

12

Install in the reverse order.