P91.10-4112-09
1 | Inner trim | 6 | Bracket | |
2 | Screw | 7 | Retaining lug | |
4 | Retaining lug | 8 | Bracket |
P91.10-4115-09
3 | Bolts | 5 | Bolts |
| Remove/install | ||
1 | Remove screws (3, 5). | ||
Do not clamp off ground line of on-board electrical system battery (G1). No electrical connectors must be disconnected. | |||
2 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
3 | Position front seat so that the inner trim (1) is accessible. | Aid of helper required. | |
4 | Remove bolt (2). | ||
5 | Carefully route inner trim (1) out of holder (6). | Installation: Make sure that the retaining lug (7) is correctly seated in the holder (6). | |
6 | Route inner trim (1) out of holder (8) and remove. | Installation: Make sure that the retaining lug (4) is correctly seated in the holder (8). | |
7 | Install in the reverse order. |