P91.10-2970-09
Shown on right front seat
1 Backrest frame
2 Trim
5 Bolts
3 Expansion clip
4 Bolt
| Remove/install | ||
1 | Remove seat cushion of left or right front seat | ||
2 | Remove spring frame with air cushion | ||
3 | Remove wiring harness from backrest frame (1) | Number of electrical connectors differs according to configuration. | |
Installation: Pay attention to routing and attachment of wiring harness. | |||
4 | Remove left and right expansion clip (3), unclip left and right paneling (2) | ||
5 | Warm up bolt (4) at backrest fitting and remove | Installation: Replace bolt (4) and corresponding washer. | |
| |||
| |||
6 | Warm up bolts (5) at backrest fitting and remove | Installation: Replace bolts (5). | |
| |||
| |||
7.1 | Remove left front multicontour backrest control unit or right front multicontour backrest control unit | When replacing the backrest frame (1) on vehicles with code (409) Left/right front multicontour seats or code (432) Left and right dynamic multicontour seat. | |
| Notes on avoiding damage to electronic components due to electrostatic discharge | ||
8.1 | Remove seat belt | When replacing the backrest frame (1). | |
9 | Remove backrest frame (1) | ||
10.1 | Remove detachable parts | When replacing the backrest frame (1). | |
11 | Install in the reverse order |
Front seats
Number | Designation | Model 216 | ||
BA91.10-P-1004-01O | Bolt for inner backrest fitting | Nm | 46 | |
BA91.10-P-1005-01O | Bolt for outer backrest fitting | Nm | 55 | |
Commercially available tools
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar9110p2050sc
- ar9110p3310sc
- ar9140p1010sc