AR91.10-P-1070G | Remove/install driver's seat cushion | 4.3.96 |
MODEL 170 except CODE (560) Left and right electrically adjustable driver seat
P91.10-0389-06
1 Handle
2 Screw
3 Cover
4 Expanding anchor
5 Bearing bracket
7 Seat cushion
P91.10-2321-06
5 Bearing bracket
6 Cushion shell
7 Seat cushion
8 Seat frame
9 Spring
| Removing, installing | ||
1 | Remove driver's seat | ||
2 | Remove handle (1) | To do so, press on detent tab (arrow) using small screwdriver and remove handle (1). | |
3 | Unscrew bolt (2) | Use internal Torx T 20 wrench socket. | |
| |||
4 | Press cover (3) downwards and remove at front | ||
5 | Remove dowels (4) on bearing bracket (5) at front left and right | ||
6 | Unclip bearing bracket (5) at left and right of cushion shell (6) and swivel outwards | ||
7 | Lift seat cushion (7) at front and remove from seat frame (8), then remove both springs (9) on the seat frame (8) at rear | When installing, insert both springs (9) with the tight windings downwards at an incline into the disk springs and insert into the cushion shell's (6) hump. Slide seat cushion (7) to the rear below the driver's seat backrest and fasten at front with the bearing bracket (5). | |
8 | Install in the reverse order |
000 589 01 10 00
Torx bit set