P91.10-0384-09
1 Driver's seat
2 Cover
6 Arresting bolt
3, 4 and 5 screws
| Removing, installing | ||
1 | Move driver's (1) seat all the way back | ||
2 | Pull front covering (2) from seat runners | ||
3 | Unscrew 2 screws (3) | | |
4 | Move driver's (1) forward | ||
5 | Unscrew screw (4) at belt end fitting (17 mm) | | |
During installation, screw belt end fitting on such that it can be moved. | |||
6 | Remove belt end fitting from seat adjuster | ||
7 | Undo 2 screws (5) | | |
8 | Remove connectors for seat heater, seat occupation (passenger) or electrical seat adjustment | ||
9 | Move driver's seat (1) backward, lift and remove | During installation, insert arresting bolts (6) in holes in rear console in floor of vehicle. | |
10 | Install in the reverse order |
Front seats
Seat belts/emergency tensioning retractors