Remove/install seat cushion padding on front passenger seat

AR91.10-D-1022TSA

Remove/install seat cushion padding on front passenger seat

21.05.2019

Model

907.6, 910.6

with code S20 (Co-driver's seat, static, folding)

with code SH2 (Thorax/pelvis side-impact airbag, front passenger)

with code ZU7 (National version for Canada)

Model

907.6, 910.6

with code S20 (Co-driver's seat, static, folding)

with code SH2 (Thorax/pelvis side-impact airbag, front passenger)

with code ZU8 (National version for USA)

1

Seat cushion padding

5

Electrical connector

9

Backrest frame

2

Seat cushion frame

6

Electrical connector

10

Electrical wiring harness

3

Bolts

7

Catch hook

11

Mounting clip

4

Bolts

8

Passage grommet

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Remove

1

Disconnect electrical connector of side airbag.

AR91.10-D-1020TSA

 Do not remove the electrical wiring harness when doing so.

2

Mark position of seat cushion padding (1) relative to seat cushion frame (2).

 To do so, make markings in areas (A, B).

3

Remove bolts (3, 4).

 Screws (3, 4) have different lengths.

4

Disconnect electrical connector (5) from electrical connector (6).

 To do so, release catch hooks (7).

5

Remove feed-through grommet (8) from seat backrest frame (9).

6

Remove electrical wiring harness (10) from seat backrest frame (9).

 To do so, unclip retaining clip (11).

 Clip remover

*452589016300

7

Fold seat cushion padding (1) downward.

 To do so, actuate the seat cushion padding release (1).

8

Remove seat cushion padding (1) with electrical wiring harness (10).

 To do so, guide electrical wiring harness (10) through seat backrest frame (9).

 The seat occupancy recognition and seat cushion padding (1) are a single unit.
Disassembling of this unit is not permitted.



Install

9

Transfer markings made in areas (A, B) from old seat cushion padding (1) to new seat cushion padding (1).

If seat cushion padding (1) has been replaced.

10

Place seat cushion padding (1) with electrical wiring harness (10) on seat cushion frame (2).

 To do so, guide electrical wiring harness (10) through seat backrest frame (9).

11

Fold seat cushion padding (1) upward.

 To do so, actuate the seat cushion padding release (1).

12

Attach electrical wiring harness (10) to seat backrest frame (9).

 To do so, clip in retaining clip (11).
Check retaining clip (11) for damage.

 Clip remover

*452589016300

If retaining clip (11) is damaged,



replace retaining clip (11).

13

Attach feed-through grommet (8) to seat backrest frame (9).

14

Connect electrical connector (5) to electrical connector (6).

 Until catch hooks (7) engage audibly.

15

Align seat cushion padding (1) with seat cushion frame (2).


Ensure that the seat cushion padding (1) is correctly aligned on the seat cushion frame (2).
Otherwise the seat cushion padding (1) will be damaged.

 To do so, observe marks made in areas (A, B).

16

Screw in screws (3, 4).


Note length of screws (3, 4).
Otherwise the seat cushion padding (1) will be damaged.

17

Connect electrical connector of side airbag.

AR91.10-D-1020TSA



Check

18

Check Supplemental Restraint System (SRS) using vehicle diagnosis system.

If seat cushion padding (1) has been replaced.



Connect/disconnect diagnostic unit

AD00.00-D-2000-06TS