Remove/install suspension module shock-absorber strut

AR91.10-D-0006TS

Remove/install suspension module shock-absorber strut

15.08.2018

Model

907, 910

with code SB3 (Suspension seat, comfort version, driver's seat)

Model

907, 910

with code SB4 (Suspension seat, comfort version, co-driver's seat)

1

Nut

2

Screw

3

Draw spring

5

Shock-absorber strut

 Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

 

Remove/install

1

Remove boot.

AR91.10-D-3445TS

 The suspension module must release at the release lever.

2

Unscrew nuts (1).

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW

 Commercially available tools
Open end wrench bit sz 13 mm

 Screw, shock-absorber strut to suspension module frame

*BA91.10-N-1010-01TS

3

Remove bolts (2).


Protect contact areas of lever on suspension module and on draw spring (3) when removing upper screw (2).
Otherwise, damage may occur to the suspension module and to the draw spring (3).

 To do so, push draw spring (3) down at upper screw (2) using a suitable lever in the removal area.

4

Remove shock-absorber strut (5).

 For this, remove shock-absorber strut (5) upwards.

 Installation: Observe installation position of shock-absorber strut (5).

5

Install in the reverse order.

 Front seats

Number

Designation

Model 907, 910

BA91.10-N-1010-01TS

Screw, shock-absorber strut to suspension module frame

Nm

22