P88.60-2568-09
1 | Tank filling recess | 6 | Cap | |
3 | Hinge | 7 | Electrical connector | |
4 | Check strap | 9 | Catch hook | |
5 | Fuel filler flap | M14/10 | Tank cap central locking actuator |
1 | Tank filling recess |
1.1 | Catch hook |
1.2 | Fitting |
2 | Rubber plug |
8 | Extraction hook |
10 | Drill bit |
11 | Tank filler recess seal |
P88.60-2569-06
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
| Remove | ||
1 | Fold up fuel filler flap (5) | ||
2 | Unlock fuel filler flap (5) from release locks (arrow A) and remove from hinge (3) | ||
3 | Unclip check strap (4) on cap (6) from hinge (3) | ||
4 | Unscrew cap (6) | ||
5 | Unclip tank cap central locking actuator (M14/10) from catch hooks (9) and pull out until electrical connector (7) is accessible | ||
6 | Disconnect electrical connector (7) and remove tank cap central locking actuator (M14/10) | ||
7 | Screw on cap (6) | ||
8 | Drill tank filler recess (1) on release holes (arrows B, C, D, E) with Ø 3 mm drill bit (10) | | |
9 | Coat seal tank filler recess (11) on filler neck with lubricant | Special lubricant | |
10 | Unlock catch hook (1.1) behind release holes (arrows B, C, D, E) with extraction hook (8) and simultaneously pull tank filler recess (1) slightly out of fender | Extraction hook | |
11 | Remove tank filler recess (1) out of fender and remove tank filler recess seal (11) above filler neck | | |
12 | Remove drain hose from fitting (1.2). | ||
| Install | ||
13 | Install rubber plug (2) in tank filler recess (1) | Only if tank filler recess (1) is not replaced. | |
14 | Coat seal tank filler recess (11) with lubricant in area of filler neck | Special lubricant | |
15 | Install drain hose on fitting (1.2) | ||
16 | Insert tank filler recess (1) into fender and install seal tank filler recess (11) above filler neck | ||
17 | Clip catch hook (1.1) of tank filler recess (1) into fender | ||
18 | Unscrew cap 6) | ||
19 | Install electrical connector (7) on tank cap central locking actuator (M14/10) and clip in tank cap central locking actuator (M14/10) | ||
20 | Screw on cap (6) | ||
21 | Clip check strap (4) on cap (6) into hinge (3) | ||
22 | Slide tank cap (5) onto hinge (3) and arrest | ||
23 | Close fuel filler flap (5) |
140 589 02 33 00
Extraction hook
Powiązane dokumenty
- as4700z000101a Niebezpieczeństwo wybuchu wskutek zapalenia, niebezpieczeństwo zatrucia wskutek wdychania i połknięcia paliwa oraz niebezpieczeństwo obrażeń wskutek kontaktu skóry i oczu z paliwem.