Disassemble/assemble rear bumper

AR88.20-D-2100TSB

Disassemble/assemble rear bumper

29.01.2018

Model

907.6/7, 910.6

except code JA7 (Blind Spot Monitoring)

except code JB6 (Parking package with 360-degree camera)

except code JB7 (Parking Package with reversing camera)

Shown with code W73 (Rear-end door step) and with code JB6 (Parking Package with 360° camera)

1

Rear bumper

8

Rear bumper bracket

Shown with code W73 (Rear-end door step) and with code Q22 (Trailer coupling, non-removable ball head)

1

Rear bumper

9

Cover

8

Rear bumper bracket

10

Catches

Shown with code JB6 (Parking Package with 360° camera)

8

Rear bumper bracket

12

Catches

11

Catches

Shown with code JA7 (Blind Spot Assist) and with code JB6 (Parking Package with 360° camera), left side of vehicle

4

Bumper corner upper section

6

Bumper corner

7

Reflector

 

Disassemble/assemble

1

Remove rear bumper (1)

AR88.20-D-2200TSB


Set down rear bumper (1) on a suitable base.
This prevents damage to rear bumper (1).

2

Remove cover (9)

Model 907.6/7, 910.6 with code Q22 (Trailer coupling, non-removable ball head) with code W73 (Rear-end door step)

 For this purpose, release catches (10).

3

Remove reflectors (7)

 For this purpose, release catches (arrows A).

4

Remove rear bumper corners (6)

AR88.20-D-0010TS

5

Remove bumper corner upper sections (4)

6

Remove rear bumper (1) from rear bumper bracket (8)

 For this purpose, release catches (11, 12).

7

Assemble in the reverse order