Remove/install front fenders

AR88.10-P-1000SO

8.11.04

MODEL 450.300 /400 with CODE (L27) Canada

P88.10-2092-09

1 Front fender

2 Rivet

3 Spoiler

7 Screw

8 Clip

4 Front center section

5 Rivet

6 Rivet

	Remove
1	Remove turn signal		AR82.10-P-4725SM
2	Remove front CBS		AR88.00-P-1010SM
3	Remove front side marker lamp		AR82.10-P-2001SM
4	Remove rivet (2) from outer left and right spoiler (3)
5	Remove rivets (5) at front center section (4)
6	Detach spoiler (3) with suitable tool from catches (arrows) and remove	 Check catching lugs. Installation: Position spoiler (3) and ensure latching of catch lugs.
7	Remove upper rivet (6) on front fender (1)
8	Unscrew bolt (7) from front center section (4)
9	Unclip clip (8)
10	Remove front fender (1) from front center section (4)
	Install
11	Machine front fender (1)	 Only when front fender (1) is replaced, see: 
		Install front side marker lamp bracket	AR82.10-P-2001-01SM
12	Position front fender (1) on front center section (4) and align
13	Insert clip (8)
14	Screw bolt (7) into front center section (4)
15	Insert upper rivet (6) into front fender (1)
16	Install spoiler (3)	 Check catch lugs.
		Installation: Position spoiler (3) and ensure latching of catch lugs (arrows).
17	Insert rivet (5) into front center section (4)
18	Insert rivet (2) into outer left and right spoiler (3)
19	Install front side marker lamp		AR82.10-P-2001SM
20	Install CBS front		AR88.00-P-1010SM
21	Install turn signal lamp		AR82.10-P-4725SM