AR82.10-P-2001SM | Removal/installation of front side-marker lamp | 3.11.04 |
MODEL 450.300 /400 with CODE (L27) Canada
P82.10-3963-01
1 Electrical connector
E6/1 Left front side-marker lamp
E6/2 Right front side-marker lamp
P82.10-3964-04
2 Support base
E6/1 Left front side-marker lamp
E6/2 Right front side-marker lamp
| Remove | ||
1 | Remove CBS front end | First, remove CBS front end from the body far enough until the front side-marker lamps can be disconnected. | |
2 | Disconnect electrical connector (1) of left front side-marker lamp (E6/1) and right front side-marker lamp (E6/2) | ||
3 | Remove left front side-marker lamp (E6/1) or right front side-marker lamp (E6/2) | Use assembly tool. | |
See Fig. A. Fitassembly tool straight onto the side-marker lamp. | |||
See Fig. B. Release left front side-marker lamp (E6/1) or right front side-marker lamp (E6/2) by rotating it by 90° and remove from the base (2). | |||
| |||
| Install | ||
4 | Install left front side-marker lamp (E6/1) or right front side-marker lamp (E6/2) | Make sure that the corresponding side-marker lamp is inserted for the particular side. | |
Use assembly tool. | |||
See Fig. A. Fit assembly tool straight onto the side-marker lamp. | |||
See Fig. B. Insert left front side-marker lamp (E6/1) or right front side-marker lamp (E6/2) into the base (2) and lock it by rotating it by 90°. | |||
| |||
5 | Move the CBS front end to the attachment position. | ||
6 | Connect electrical connector (1) of left front side-marker lamp (E6/1) and right front side-marker lamp (E6/2) | ||
7 | Install CBS front end | ||
| Check | ||
8 | Check side-marker lamps for proper operation |
Commercially available tools
Number | Designation | |
WH58.30-Z-1001-19B | Assembly tool for front side marker Firma DaimlerChrysler Corporation DC Purchase Abteilung 4330 CIMS 484-01-20 Phone: 001-248-944-0690, Fax: 001-248-576-2188, Email: [email protected] | 002 0881 V001 |