ar8660s2166e

Remove/install gas cooker

Typ ar · temat 86.60 · wersja 0200 · 2016-09-14

Dotyczy: Model 447.8 with code ZK7 (Equipment line MARCO POLO)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 86 Urzadzenia awaryjne, wyposażenie dla niepełnosprawnych, wyposażenie sanitarne, kuchnia › 86.60 Kuchnia — Seria 447 (modele 8**)

EinPAS 37 Wyposażenie wnętrza › 37.76 Kuchnia pokładowa/ lodówka › 37.76.30 Urządzenia kuchenne — Seria 447 (modele 8**)

AR86.60-S-2166E

Remove/install gas cooker

08.09.2016

Model

447.8

with code ZK7 (Equipment line MARCO POLO)

Modification notes

24.08.2016

Safety notice replaced

Notice block located in front of work description

Remove/install gas cooker

S86.60-4619-09

1

Gas cooker

5

Nut

9

Bolts

2

Temperature sensor

6

Screw

10

Cover

3

Spring

7

Gas outlet

4

Piezo igniter

8

Carrier plate

Danger !

Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas.

Remove any sources of ignition.
Protective clothing, safety gloves and safety glasses must always be worn.
Ensure that the work area is adequately ventilated.
When working on vehicles at ambient temperatures over 60 °C, all gas cylinders must be removed.

AS00.00-Z-0018-01A

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Close shutoff valve on gas cylinder

See owner's manual.

2

Remove temperature sensor (2) on corresponding gas cooker (1)

AR86.60-S-0015E

Do not disconnect electrical connector on temperature sensor (2).

Installation: Reinstall cover (10) only after checking for proper function and leakage.

3

Remove spring (3) and remove piezo ignition (4) downward

Installation: Ensure that spring (3) and piezo ignition (4) are seated correctly.

4

Unscrew nut (5)

5

Remove gas outlet (7) at bottom of gas cooker (1)

Installation: Ensure that gas outlet (7) is seated correctly.

6

Unscrew bolts (6) and remove carrier plate (8) at bottom of gas cooker (1)

Installation: Ensure that carrier plate (8) is seated correctly.

7

Remove gas cooker (1)

8

Install in the reverse order

Check

9

Check gas cooker for proper function and leakage

Powiązane dokumenty