S86.60-4637-09
1 | Guide rail | 5 | Screw | |
2 | Cover | 6 | Stove/sink unit | |
3 | Table | 7 | Bolts | |
4 | Cover |
S86.60-4638-09
1 | Guide rail | 8 | End stop | |
4 | Cover |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove sliding carriage for table (3) | ||
2 | Remove refrigerator box of kitchenette | ||
3 | Detach paneling (2) from kitchenette at front and guide to side | ||
4 | Remove water tap from stove and sink unit (6) | ||
5 | Loosen gas line with regulating valve for gas cooker until bolt (5) is accessible in area of left regulating valve | ||
6 | Remove refrigerator box cove on kitchenette | ||
7 | Remove screws/bolts (5) | ||
8 | Hold nuts of bolts (7) and unscrew bolts (7) | ||
9 | Mask guide rail (1) and stove and sink unit (6) in area of silicon joint with suitable masking tape | ||
10 | Slightly pull guide rail (1) off of stove and sink unit (6), cut silicon joint with suitable tool and remove guide rail (1) | Installation: Apply silicon joint only after tightening bolts (5, 7). | |
Sikasil N Plus, black | |||
11 | Remove paneling (4) from guide rail (1) | When replacing guide rail (1) or paneling (4). | |
12 | Determine assembly position of end stops (8) for cover of kitchenette and transfer to new guide rail (1) | When replacing guide rail (1). | |
13 | Install new end stops (8) for cover of kitchenette on guide rail (1) | When replacing guide rail (1). | |
Observe markings. | |||
| Clean | ||
14 | Clean bonding surfaces on guide rail (1) | If the guide rail (1) is not replaced. | |
| |||
Assembly cleaner | |||
15 | Clean bonding surface on stove and sink unit (6) | | |
Assembly cleaner | |||
16 | Install in the reverse order |
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar8660s0002e
- ar8660s0026e
- ar8660s0086e
- ar8660s2175e
- ar8661s0055e
- ar8661s0057e
- ar8661s2321e